 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Bulletin I27129 rev. C 05/03 200MT40KB THREE PHASE BRIDGE Features Package fully compatible with the industry standard INT-Apak power modules series High thermal conductivity package, electrically insulated case Low power loss Excellent power volume ratio, outline for easy connections to power transistor and IGBT modules 4000 VRMS isolating voltage UL E78996 approved Power Module 200 A Description It extents the existing range of MT...KB bridges an extremely compact, encapsulated three phase bridge rectifiers offering efficient and reliable operation. They are intended for use in general purpose and heavy duty applications. Major Ratings and Characteristics Parameters IO @ TC IFSM @ 50Hz @ 60Hz It 2 200MT40KB 200 85 1800 1880 16.2 14.7 162 400 - 40 to 150 - 40 to 150 Units A C A @ 50Hz @ 60Hz KA2s I2t VRRM TSTG range TJ range KA2s V C www.irf.com 1 200MT40KB Bulletin I27129 rev. C 05/03 ELECTRICAL SPECIFICATIONS Voltage Ratings VRRM, maximum Type number repetitive peak reverse voltage V 400 VRSM, maximum non-repetitive peak reverse voltage V 500 IRRM max. @ TJ = 150C mA 6 200MT40KB Forward Conduction Parameter IO ITSM Maximum RMS output current @ Case temperature Maximum peak, one-cycle forward, non-repetitive on state surge current I2t Maximum I2 t for fusing 200MT40KB 200 85 1800 1880 1520 1590 16.2 14.7 11.6 12.6 Units Conditions A C A 120 Rect conduction angle t = 10ms t = 8.3ms t = 10ms t = 8.3ms KA2s t = 10ms t = 8.3ms t = 10ms t = 8.3ms No voltage reapplied 100% VRRM reapplied No voltage reapplied 100% VRRM reapplied Initial TJ = TJ max. I2t Maximum I2t for fusing 162 0.76 2.4 1.40 4000 KA2s t = 0.1 to 10ms, no voltage reapplied V m V V Ipk = 200A, TJ = 25C, tp = 400s single junction TJ = 25oC all terminal shorted, f = 50Hz, t = 1s @ TJ max. VF(TO) Value of threshold voltage rt VFM VINS Slope resistance Maximum forward voltage drop Insulation voltage Thermal and Mechanical Specifications Parameter TJ Maximum junction operating temperature range Tstg RthJC Maximum storage temperature range Maximum thermal resistance, junction to case 0.12 0.69 0.14 0.82 RthCS Maximum thermal resistance, case to heatsink T Mounting torque 10% to heatsink wt Approximate weight 176 g 4 to 6 Nm 0.033 K/W K/W DC operation per module DC operation per junction 120 Rect condunction angle per module 120 Rect condunction angle per junction Per module. Mounting surface smooth, flat and greased. Heatsink compound thermal conductivity = 0.42W/mK A mounting compound is recommended and the torque should be rechecked after a period of 3 hours to allow for the spread of the compound. Lubricated threads. 200MT40KB - 40 to 150 Units Conditions C -40 to 150 C 2 www.irf.com 200MT40KB Bulletin I27129 rev. C 05/03 Ordering Information Table Device Code 20 0 MT 40 K B 1 2 3 4 5 1 2 3 4 5 - Current rating code: 20 = 200 A (Avg) Three phase diodes bridge Essential part number Voltage code: Code x 10 = VRRM (40 = 400V) Generation II Outline Table (without optional barriers) D A B C E F All dimensions in millimeters (inches) NOTE: To order the Optional Hardware see Bulletin I27900 www.irf.com 3 200MT40KB Bulletin I27129 rev. C 05/03 Outline Table (with optional barriers) D A B C E F All dimensions in millimeters (inches) Maximum Allowable Case Temperature (C) 140 130 120 110 100 90 80 70 60 80 100 120 140 160 180 200 220 Total Output Current (A) Fig. 1 - Current Rating Characteristics Instantaneous On-state Current (A) 1000 120 (Rect) 100 Tj = 25C 10 Tj = 150C 1 0.5 1 1.5 2 2.5 3 Instantaneous On-state Voltage (V) Fig. 2 - On-state Voltage Drop Characteristics 4 www.irf.com 200MT40KB Bulletin I27129 rev. C 05/03 Peak Half Sine Wave On-state Current (A) Peak Half Sine Wave On-state Current (A) 1600 1400 1200 1000 800 600 At Any Rated Load Condition And With Rated Vrrm Applied Following Surge. Initial Tj = 150C @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s 2000 1800 Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Control Of Conduction May Not Be Maintained. 1600 Initial T j = 150C No Voltage Reapplied 1400 Rated V rrm Reapplied 1200 1000 800 600 400 200 Per Junction Per Junction 400 1 10 100 Number Of Equal Amplitude Half Cycle Current Pulses (N) 0 0.01 0.1 1 10 Pulse Train Duration(s) Fig. 4 - Maximum Non-Repetitive Surge Current Fig. 3 - Maximum Non-Repetitive Surge Current 500 5 02 0. = A hS Rt W K/ Maximum Total Power Loss (W) 0. 1 05 0. K/ W 400 300 200 100 0 0 40 80 120 160 0 200 120 (Rect) W K/ 0.2 K/ W 0.3 K/W 0.5 K/W 1 K/W a elt -D R Tj = 125C 30 60 90 120 150 Total Output Current (A) Maximum Allowable Ambient Temperature (C) Fig. 5 - Current Rating Nomogram (1 Module Per Heatsink) Transient Thermal Impedance Z thJC (K/W) 10 Steady State Value RthJC per junction = 0.69 K/W DC Operation) 1 0.1 0.01 0.0001 0.001 0.01 0.1 1 10 Square Wave Pulse Duration (s) Fig. 6 - Thermal Impedance Z thJC Characteristics www.irf.com 5 200MT40KB Bulletin I27129 rev. C 05/03 Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 05/03 6 www.irf.com |
Price & Availability of 200MT40KB
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |